Found This Big Drawer at a Home Resource. It Was 22x36x9" Deep.

I happened upon this great big kitchen drawer - they are solid wood.

It is in good shape and I took the handle off and filled the holes on top. This will end up being a donated TV stand for a person who is getting her own apt., having recently been moved out of a nursing home.

The drawers had been painted, but the paint was easily covered once I added two shelves and a base bottom.

The base helped stabilize the bottom, because this will end up being a TV stand and book-case for the person who is getting it.

I had these shelves from another project that someone was going to throw away. Just cut to size. They were nailed in, until I could screw in from the sides. I then filled in the screw holes and painted.

This happened to be a super-large drawer! See that we drilled a round hole in the back of the top shelf so a plug-powered item can be put onto the shelf. DVD players are super-small now and will fit on the shelf!

I will be donating the stand and the TV to this woman, who is getting to move into her apartment! I used a can of OOPS paint-and-primer in one, and then sprayed it with satin clear spray paint to seal. Total cost: $6.00 for the whole project.

This project took about 2 hours total, not counting the paint. Like my view?

Original article and pictures take http://www.hometalk.com/14401398/found-this-big-drawer-at-a-home-resource-it-was-22x36x9-deep site